Share This Video

Unlimited Music Streaming

Thanks! Share it with your friends!

You disliked this video. Thanks for the feedback!

Spyder Auto How to Install: 2014-2018 Toyota Tundra LED Lightbar Headlights

Added by AutomotiveUploads
This video demonstrates how to install a set of Spyder Auto 2014-2018 Toyota Tundra LED Lightbar Headlights. This complete how-to tutorial guides you, from start to finish, through the installation process. It also offers helpful tips throughout to facilitate a successful installation.

1. Quarter-inch ratchet
2. 10mm deep socket
3. Panel-popper

1. Open the hood.
2. Above the grille, remove the four 10mm bolts.
3. Remove the two push-pins as well.
4. Loosen the top of the grille.
5. Pull grilled towards front of truck to release.
6. Remove the grille.
7. Remove the two push-pins on the bumper trim.
8. Pop-off the bumper trim panel.
9. Remove the three 10mm bolts securing the light.
10. Unseat the headlight.
11. Remove the three sockets.
12. Separate the corner light bulb and socket.
13. Bring new light nearby truck.
14. Install corner light bulb into new light harness.
15. Install corner light socket into headlight.
16. Install the turn signal socket into headlight.
17. Connect the headlight plug.
18. Seat the new light.
19. Reinstall the three 10mm bolts to secure the light.
(Note that the top two have Phillips heads)
20. Reinstall the bumper trim panel.
21. Reinstall the two push-pins to secure the panel.
22. Reinstall the grille.
23. Reinstall the two push-pins and four 10mm bolts.
24. Close the hood.
16. Installation completed.
Mechanical How To

Post your comment

Sign in or sign up to post comments.


Be the first to comment