Loading...

         

Thanks! Share it with your friends!

You disliked this video. Thanks for the feedback!

MTB K2 Hardtail Build Project - The New Crank & 1x8 Conversion Part1

Added by AutomotiveUploads
6 views
MTB K2 Hardtail Build Project - The New Crank & 1x8 Conversion Part1

So I have some 'down' time due to a broken foot (see moto vids) and I thought I would spend a bit of that time building a hardtail mountain bike. This is part 1 of installing a new crankset, bottom bracket and pedals on my K2 Zed 1.0 and converting it to a 1x8 setup. Pretty straight forward really where the biggest issue was getting the old BB out I had to use a pretty serious impact wrench to get that broken loose. I picked up the crank and bracket tools for about $10 as well. I also removed the front derailleur and cable but had to leave the controls as they are brake and shifters combined into one. These will come off shortly though when I replace the brakes in another video.


I've actually never wrenched on a pedal bike before (to any serious degree) so I consider this a fun challenge and learning experience. So hang tight with me and we'll see how this all turns out!

Thanks for watching!
Category
Project Builds

Post your comment

Sign in or sign up to post comments.

Comments

Be the first to comment

Site statistics

  • Online Visitors:
  • Users Channels: 89
  • Uploaded Videos: 261,418
  • Video Streams: 2,699,864