Loading...
Share This Video

MusicFuzz.com
Unlimited Music Streaming



Thanks! Share it with your friends!

You disliked this video. Thanks for the feedback!

Building the Elegoo Smart Robot Car Part 1 - Arduino based robotics project

Added by AutomotiveUploads
13 views
Robot Car kit provided by Elegoo - https://www.elegoo.com/product/arduinocarv3-0/
Full article at https://dbot.ws/robcar1
More info and projects at https://dronebotworkshop.com

In this first of three videos I will be assembling the Elegoo Smart Robot Car kit. This is a great kit for beginners and seasoned pros alike, it would also make an ideal project for parents who want to teach their children how to work with electronics.

This robot car kit has the following features:

4-wheel Arduino-based design
IR Remote Control
Bluetooth Remote Control
Collision Avoidance
Line Following
Rechargeable LiPo batteries
No soldering, drilling or cutting required

It’s a typical Arduino-based design so even if you aren’t using this specific kit I think you’ll find a lot of useful information for any Arduino robot in this video and the two that follow it. As always there is a corresponding article on the DroneBot Workshop website to help you out.

Because of all of the features of the robot car I’ve decided to split this into three videos and articles. In this video I will go over the features of the robot car kit and then I’ll show you how to assemble it and give it a quick test.

In the next video I will show you how to use the IR and Bluetooth remote control. The final video will cover the collision avoidance and line following features.

Here is what will be covered in this first video:

Robot Car Kit Unboxing - 2:29
Elegoo Smart Robot Car features - 7:44
A look at the individual components - 9:18
Assembly Introduction - 16:07
Motor Mounts & motors to chassis - 16:54
L298N Mount - 20:53
Line Follow Sensor mount - 24:48
Arduino to top chassis & shield - 27:43
Battery compartment - 31:14
Servo Motor - 33:48
Ultrasonic Sensor - 36:09
Cable & wiring - 39:47
Bluetooth module & Tires - 44:01
Sample Arduino Code - 45:07
Robot Car Test - 51:21

This is the first of three videos so stay tuned for the next one. If you haven’t subscribed to the channel yet please do, that way you’ll be informed when the next video is published. And while you are in the subscribing mood please sign up for the DroneBot Workshop Newsletter at https://dbot.ws/dbnews
Category
Project Builds

Post your comment

Sign in or sign up to post comments.

Comments

Be the first to comment