Loading...

         

Thanks! Share it with your friends!

You disliked this video. Thanks for the feedback!

Boost Control for Cars That Need More Traction. - Jay's Tech Tips - Real Street Performance

Added by AutomotiveUploads
22 views
If you are trying to make a lot of power in a 2wd boosted vehicle, you have probably encountered the problem where you can't run low enough boost to have traction in first gear, AND run high enough boost to make the power you want in higher gears because of the limitations of the wastegate spring. A 10psi wastegate spring will allow you to make as little as 10psi, but will struggle to make much more than a maximum of 20psi (100% increase). If you are trying to make 40psi in 4th, the smallest gate spring you would want to use is 20psi, but then that prevents you from getting the boost down to 10psi in 1st for traction. Well today we discuss how to use a 4 port boost control solenoid to solve this problem and have low boost in low gears and high boost in high gears without being held to the normal limitations of the wastegate spring.

www.realstreetperformance.com
sales@realstreetperformance.com
Phone: 407-695-7223
Text / Whatsapp: 407-724-2484
120 Maritime Dr
Sanford FL 32771
Category
Real Street Performance

Post your comment

Sign in or sign up to post comments.

Comments

Be the first to comment

Site statistics

  • Online Visitors:
  • Users Channels: 78
  • Uploaded Videos: 256,085
  • Video Streams: 2,507,046