Loading...
Share This Video

MusicFuzz.com
Unlimited Music Streaming



Thanks! Share it with your friends!

You disliked this video. Thanks for the feedback!

BMW E30 M20B25 Engine Rebuild Restoration - Time-Lapse | Part 2

Added by AutomotiveUploads
15 views
Go to https://getroman.com/restoreit for a free online visit and a free month of treatment. Brought to you by Roman.

In this episode, I remove everything from the block, labeling each piece as they come off. This was way more footage than I thought there was going to be so I made this into an episode of its own.

Thanks to FCPEuro.com for supplying parts for this restoration.

Tools & equipment used:

Quartz Lacquer - https://goo.gl/8PTVKM
Base Coat Paint - https://goo.gl/mWhufG
Rust Remover - https://goo.gl/13gopW
Fast Mover 1kW Infrared Paint Dryer, Stand, Timer - https://bit.ly/2WYR9jJ
Workbenches - https://arborgardensolutions.co.uk
Moldex Full Face Mask - https://goo.gl/NNYGrv
FGL 5 Spray gun - https://goo.gl/Acg5rd
A.N.I. R150-T Mini Spray gun - https://goo.gl/cHTJS2
Colad Washable Overalls - https://goo.gl/3Css9E
Colad Mixing Cups - https://goo.gl/8DYmE8
Colad TurboMix Sticks - https://goo.gl/cYZfks
Colad Synthetic Paint Strainers - https://goo.gl/H79ZgL
Steel wire bits - http://geni.us/keyaD
Rotary Tool - http://geni.us/HGed
Concentrate Degreaser - http://geni.us/yUn9
Mannesmann Socket Set - http://geni.us/HCDZ
Bench grinder -
Parts Washer -
impact wrench -

Time Stamps:

00:00 – Showing off the engine
00:24 – Sponsor - Roman
01:22 – Removing the fan
01:33 – Removing the alternator
02:11 – Removing the crankshaft bolts
02:19 – Removing the fan clutch
02:26 – Removing the fan pulley
02:35 – Removing the crank pulley bolts
02:41 – Removing the crank pulley
02:47 – Removing the crankshaft pulley vibration damper
02:58 – Removing the alternator adjustment bracket
03:12 – Removing the engine mounts
03:24 – Removing the engine loom
03:29 – Removing the dip stick tube bracket
03:51 – Removing the exhaust manifold
04:02 – Removing the oil filter
04:18 – Removing the oil filter head
04:34 – Removing the crank potion sensor mount
04:41 – Removing the top coolant hose
05:00 – Removing the idle control valve
05:10 – Removing the throttle body
05:54 – Removing the breather hose
06:03 – Removing the intake manifold mount
06:18 – Removing the fuel pressure regulator hose
06:26 – Removing the fuel pressure regulator
06:38 – Removing the coolant temp sensor
06:46 – Removing the intake manifold
07:01 – Removing the old dip stick tube
07:19 – Removing the coolant hoses
07:48 – Removing the thermostat housing
08:13 – Removing the intake manifold to engine block return pipe
08:16 – Removing the intake gaskets
08:22 – Removing the bearing cover holder
08:32 – Removing the distributor cover and distributor
08:56 – Removing the timing belt cover and eyelet
09:24 – Removing the timing belt
09:43 – Removing the water pump
09:50 – Removing the belt tensioner
09:56 – Removing the rocker cover
10:17 – Removing the rocker cover gasket
10:21 – Removing the head bolts
10:44 – Removing the cylinder head
11:09 – Removing the coolant drain plug
11:24 – Removing the oil sump
11:52 – Removing the oil pump
12:07 – Removing the oil pump drive shaft
12:11 – Removing the oil filter
12:21 – Marking the connecting rods
12:28 – Cleaning and sanding the ridges in the cylinders
12:57 – Removing the connecting rod bolts
13:10 – Connecting rod bearing
13:17 – Removing the pistons
14:49 – Removing the main crankshaft oil seal
15:14 – Removing the crankshaft bolts
15:40 – Removing the lower crankshaft bearings
16:01 – Removing the oil pump gear
16:22 – Removing the lower timing cover
16:36 – Removing the crankshaft
16:51 – Removing the upper crankshaft bearings
17:00 – Removing the oil pump drive shaft mount
17:13 – Removing the bearing cover
17:24 – Removing the oil shaft gear wheel
17:30 – Removing the oil pump drive shaft
17:52 – Removing the cleaning the block
18:11 – Removing the oil sump gasket
19:00 – Removing the block from the stand
19:21 – All of the parts laid out
20:10 – FCP Euro – www.fcpeuro.com

If you would like to send me something to restore, tools to use or anything to support Restore It, please email:

Restoreitchannel@gmail.com

I'm doing YouTube full time, 7 days a week, so any support is appreciated.

A huge thank you to all of my Patrons. Exclusive content coming soon!

Become a patron to win the Items featured in these videos!
Patreon - https://www.patreon.com/RestoreIt

Follow me on Social media to keep up to date with videos and behind the scenes.

Twitter
https://twitter.com/Restore__It

Facebook
https://www.facebook.com/RestoreItCha...

Instagram
@RestoreItChannel

Discord
I now also have a discord server if you want to chill with like-minded people and maybe learn something new.

https://discord.gg/vNmCBk9
Category
Restoration Projects

Post your comment

Sign in or sign up to post comments.

Comments

Be the first to comment